Material notes
Seamless Textures by Material: Starting settings
The offset-and-blend method is universal. The settings are not. What changes between brick, wood, fabric, stone and plaster — and the numbers to start from for each.
The same trick — offset, then blend — works on every material; the settings do not. A brick wall and a woven cloth fail in different places: one smears across the mortar joint, the other turns into a moiré band as soon as it is scaled. This page is the settings that differ, with the numbers to start from.
None of it is a download. There is no tile library on this site: every method below starts with your own photograph, and the maker does the offsetting, the blending and the 3 × 3 check in your browser.
What changes from material to material
Scale. A brick has a known size. If one brick is 21 cm wide and the texture holds four of them, the surface is 84 cm across — mortar width, bump depth and the distance at which the pattern reads all follow from that. Cloth has no fixed size: you decide whether the weave is a tablecloth or a curtain, and the texture has to say which.
Direction. Grain and weave have a direction, and most renderers assume X is horizontal in UV space. Get that wrong and a plank floor becomes a striped wall. Decide the direction before you crop, because rotating afterwards means resampling detail.
Where the eye goes. Brick and tile have lines. Lines are the easiest thing for the eye to follow, so a smear across a mortar joint is far more visible than a smear in gravel. Cloth has a repeat frequency instead of lines, and at the wrong scale it aliases. Stone and concrete are forgiving — nobody knows what a given patch of concrete was supposed to look like.
Brick and tile: crop to whole bricks
The first mistake is a crop that cuts a brick in half. Offset the image and half a brick lands next to another half brick, so the joint doubles in width — and no blend width hides that, because the whole image is drawn around those joints. Crop on the middle of a mortar line so a whole number of bricks sits inside the frame.
Mortar joints are the most visible thing in the texture and the first casualty of a wide blend. At 14% the joint softens into a grey smear and the wall reads as out of focus along two bands. Start at 5–8% and raise it only if the 3 × 3 preview still shows a mismatch in the joint itself.
Photos of brick usually carry a lighting gradient — brighter at the top of the wall than the bottom. A gradient does not survive offsetting: it becomes a bright band across every tile. Flatten it before cropping, or shoot with flat, even light.
Keep the mortar horizontal in UV space. A brick wall rotated 90° becomes a stack bond nobody asked for, and the mortar reads as a vertical smear instead of a horizontal one.
Open the maker, set the blend to 6% and judge the result there. Fix the real-world scale at the same time: 2048 px across four 21 cm bricks is 24 px per cm, and every other material in the scene should match that number.
Wood: set the grain before you crop
Wood fails along its edges rather than across its face. Plank edges are hard, straight discontinuities, and the grain between them is soft: two very different tolerances in one image. Blend enough to hide the grain seam and the plank edges go rubbery.
Decide board direction first. A photo of floorboards shot along the boards needs no rotation; a photo shot across them needs one, and the rotation should happen before the crop so the final plank count is a whole number. A single knot, one nail, one stain that repeats every tile is the most obvious tell in a wood texture — crop around it, or clone it out first, because blending will not remove it.
Start at 8–14%. Plank edges need the lower end; the grain can take the upper end.
Open the maker and start at 10% — then look at the plank edges in the 3 × 3 preview, not at the middle of the boards.
Fabric: the weave is the scale
Cloth is the hardest of the three to judge, because the detail is high frequency: a weave that looks continuous at 100% becomes a moiré pattern the moment it is tiled small in a render or a web page. The blend is what kills it — a wide blend reads as a change in weave density, which the eye notices faster than a seam.
Start at 14–22% and always check the 3 × 3 preview at a small zoom, not just at full size. Shoot cloth flat and perpendicular, straighten the weave in the crop, and decide the intended scale before cropping: a herringbone at curtain scale and the same herringbone at upholstery scale need different pixel density.
If a strong repeat survives every blend width, the source is the problem: a printed pattern with a visible repeat period cannot be blended away, and the honest fix is a different photo.
Open the maker, set 18%, then shrink the browser window to about a quarter of its width — that is the test cloth has to pass.
Stone, concrete, gravel, plaster
These are the forgiving ones. There are no lines to smear and no frequency to alias — a patch of concrete has no canonical appearance, so nobody can tell what was mixed into it. That is exactly why the blend can go wide here: 18–30% for stone, gravel and soil, 20–30% for plaster and painted wall.
The risk moves elsewhere. A large, low-contrast surface keeps its lighting gradient very visibly, so flatten the light first; and a texture with almost no feature gives the eye nothing to anchor, which makes a faint repeating stain more noticeable, not less. Add detail, not blend.
Open the maker and start at 24% — with no joints to damage, the wide blend costs nothing on these surfaces.
Blend widths worth starting from
| Material | Blend width | Why |
|---|---|---|
| Brick, tile, anything with straight joints | 5–8% | Wider blends smear the mortar line, which is the first thing anyone looks at |
| Wood planks | 8–14% | Grain can take a little softening; the plank edges cannot |
| Fabric, cloth | 14–22% | The weave is high frequency, so softening reads as a change in weave |
| Stone, concrete, gravel, soil | 18–30% | No one can tell what the detail was, so mixing costs nothing |
| Plaster, painted wall | 20–30% | Fine texture, no strong features to destroy |
These are starting points, not rules. The 3 × 3 preview decides, and the seam score in the maker gives you a number when your eye is unsure.
A note on what this site is not
It is not a texture library. There is no download catalogue here and no stock images — the tools work on the images you bring, and those images never leave your browser. What this page gives you is the method, the measurement and the fixing, which is the part most texture sources assume you already know.
Choosing a source photo
Three rules survive across every material: shoot perpendicular to the surface so the perspective is flat, light it evenly so there is no gradient to repeat, and crop to a whole number of pattern repeats wherever the pattern is regular. If the photo breaks all three, no blend width rescues it — take the photo again.
When the texture is made, check it rather than trusting a 100% zoom, then let the normal map generator turn the same source into a PBR map so the surface reacts to light the way the material does.
Material questions
Does the method change per material?
The method does not — offset, then blend both seams. What changes is the crop (a whole number of pattern repeats), the blend width (5% for mortar joints, up to 30% for organic noise), and whether the material has a direction that has to stay horizontal in UV space.
Does the site include free textures to download?
No. There is no stock library here — the tools process images you supply, in your browser. This page explains how to shoot and fix each material, which is the part most texture libraries leave out.
How do I know which blend width is right?
The 3 × 3 preview after each blend. Materials with straight joints (brick, tile) show a smear; materials with a repeat frequency (fabric) show an alias band; organic materials show a ghost of the original edge. All three are visible before you export.
How do I get the real-world scale right?
Measure one repeat in the photograph (a 21 cm brick, a 14 cm plank), count how many repeats fit across the texture, and the size in metres follows. Keep it consistent across every material in the same scene.